Setting up the I/O Designer LMS Browser.

 Before I/O Designer can be used inside an existing LMS environment 
 the librarian has to create a special 'FPGA' menu
 that will be used by I/O Designer to select the LMS component:
   
   1. Add a new frame menu to the main menu_driver.config file called
      'FPGA Devices'
   
   2. Add a new sub menu within this new frame to the main menu_driver.config
      file called 'FPGA'
   
   3. Add a file called frame_fpga.template to the LMS template 
      directory containing only the 'FPGA' sub menu reference.
   
   4. Add a file called fpga.template to the template directory containing
      a query for all the FPGA's in the company LMS library. 
      
      NOTE: sample fpga.template query file provided here must be adjusted
            to the company LMS library. 
   
   5. Build the LMS menu in the LMS Library Manager.

 The output LMS menu file will be stored in the $RLSLIB/sys/menus/fpga location,
 where I/O Designer will read them to create the LMS Browser menu.
