RSCM Settings Dialog Box

To Access:

Management > Install: The dialog box opens as the Add RSCM dialog box. After you specify the SDD_HOME path and the WDIR path, the other fields are enabled.
Management > Start with an unconfigured RSCM Server selected: The dialog box opens as the Edit RSCM settings dialog box. Any required fields that need input are highlighted in red. You must complete configuration before the RSCM Configurator can start the RSCM Server.
Management > Edit on any selected RSCM Server: The dialog box opens as the Edit RSCM settings dialog box. Change options as you desire.

Use this dialog box to set up parameters for the RSCM Configurator.

Figure 1. RSCM Settings Dialog Box

Objects

Table 1. RSCM Settings Dialog Box Options
Field	Description
Name	The RSCM Configurator creates a string for this name.
SDD_HOME	Specifies the path to the SDD_HOME location of the install with the RSCM Server software.
Port	Specifies the port number for the RSCM Server
Startup type	List box with three options: Automatic (default): The RSCM Server will start automatically every time you power on the RSCM Server machine. Disabled: The RSCM Server software remains installed, but does not run. Manual: The RSCM Server will not start when you power on the RSCM Server machine until you start it manually from the RSCM Configurator.
Coordinator mode	Enables/disables RSCM Server as Coordinator.
WDIR > Writeable	Specifies path to the local WDIR directory.
WDIR > Additional	Specifies any additions WDIR paths, such as a corporate WDIR location.
WDIR > Standard	Shows the path to the standard WDIR directory in the install. This is not editable.
WDIR > Path	Shows the full WDIR path as defined in the WDIR environment variable. It is the concatenation of all WDIR paths specified above.
Local System account	Specifies to run the RSCM Server service with the local system account’s user settings.
This account	Specifies to run the RSCM Server service with a user account other than the local system account.
Password	Password for the user account.
Confirm password	Repeat the password for the user account.
Account rights	This is a fixed message that reminds you to make sure the user account you specify has read/write permissions to the projects and you expect this RSCM Server to host.