VdParamValue Enum

Scope: Xpedition Designer schematic editor

Prerequisites: None.

Specifies various values used in the Xpedition Designer session.

Usage

VdParamValue.Constant

Arguments

VDVAL_ADISTANCE: Avoidance distance. The numerical value for this constant is 10 (&HA).
VDVAL_ANNO_SIZE: Default annotation size. The numerical value for this constant is 16 (&H10).
VDVAL_ATTR_ON_SPLIT: Default placement of attributes on net split. The numerical value for this constant is 29 (&H1D).
VDVAL_BLOCK_TYPE: The default block type. The numerical value for this constant is 15 (&HF).
VDVAL_BOX_SIZE: Default dangle box size. The numerical value for this constant is 12 (&HC).
VDVAL_BUBBLE_SIZE: Bubble size. The numerical value for this constant is 8.
VDVAL_BUS_DOT_SIZE: Bus dot size. The numerical value for this constant is 17 (&H11).
VDVAL_DEFMETHOD: Default borders method. The numerical value for this constant is 22 (&H16).
VDVAL_DOT_SIZE: Dot size. The numerical value for this constant is 1.
VDVAL_DOTSIZE_THREE_SEGMENT: Default size for bus dots on 3-segment joints. The numerical value for this constant is 28 (&H1C).
VDVAL_GRID: Grid spacing. The numerical value for this constant is 0.
VDVAL_GRID_HIGHLIGHT_INTERVAL: Default interval for grid highlight. The numerical value for this constant is 26 (&H1A).
VDVAL_LABEL_ON_SPLIT: Default placement of label on net split. The numerical value for this constant is 30 (&H1E).
VDVAL_LABELTHRESHOLD: Number of labels needed to trigger a sub-menu. The numerical value for this constant is 24 (&H18).
VDVAL_LONG_LINE_ERRORS: Report long line errors. The numerical value for this constant is 20 (&H14).
VDVAL_MRU_SIZE: The numerical value for this constant is 31 (&H1F).
VDVAL_NET_LENGTH: Default length for net stubs. The numerical value for this constant is 27 (&H1B).
VDVAL_NET_SPACING: Default spacing for Auto Net Array. The numerical value for this constant is 25 (&H19).
VDVAL_NEW_ATTR_VIS: New attribute visibility. The numerical value for this constant is 14 (&HE).
VDVAL_NO_UNDO_CBA_MOVE: Report “no undo connect by abutment” moves. The numerical value for this constant is 21 (&H15).
VDVAL_ORIENTATION: Default drawing orientation. The numerical value for this constant is 23 (&H17).
VDVAL_ROUTE_MODE: Route mode. The numerical value for this constant is 9.
VDVAL_SCOPE: Default label scope. The numerical value for this constant is 11 (&HB).
VDVAL_SELECTION: Default selection distance. The numerical value for this constant is 7.
VDVAL_SHEET_SIZE: The numerical value for this constant is 6.
VDVAL_STROKE_DELAY: The numerical value for this constant is 32 (&H20).
VDVAL_TEXT_THRESHOLD: The numerical value for this constant is 13.
VDVAL_TORIGIN: The numerical value for this constant is 4.
VDVAL_TSIZE: The numerical value for this constant is 3.
VDVAL_UNDO: The numerical value for this constant is 18 (&H12).
VDVAL_WIDTH: The numerical value for this constant is 5.